Home | Links | Regatta Reports | Photos | Frequency Chart |Sailing Sites
Contact Us | For Sale | Schedule | Calendar
1) 1/2" PVC pipe 76" long cut into:
four, 6-1/2" pieces (diagonal bottom legs)
four, 6" pieces (diagonal top legs)
two, 13" pieces (horizontal top supports)
2) two PVC cross joints for 1/2" pipe
3) four PVC right angle joints for 1/2" pipe
4) four PVC end caps for 1/2" pipe
5) Your choice, old fabric belt, luggage straps, plastic rope, etc.
to supportboat.
6) Make a carrying handle (shown in the photos) that cradles the
boat when being carried from a short piece of excess 1/2" PVC pipe
and some rope.
7) Drilled some holes in the horizonal supports 1-1/4" from each
side to secure the 15" straps with sheet metal screws and finishing
washers.
8) Build a 28" keel support strap 4-1/2" from one side of each of
the horizontal PVC pipe supports.
9) It takes about an hour to build the stand.